2000 Porsche Boxster S

ENGINE
Type Flat-6, normally aspirated, aluminum block and heads
Displacement 3.2 liters
Valvetrain DOHC 4-valve
Compression Ratio 11.0:1
Bore & Stroke 93.0 mm x 78.0 mm
Horsepower 250 bhp @ 6250 rpm
Torque 225 lb-ft @ 4500 rpm
Redline 7200 rpm
Fuel Injection Electronic sequential port
PERFORMANCE
0-60 MPH 5.6 sec
1/4 Mile 14.0 sec @ 100.5 mph
Top Speed 161 mph
Mileage (city/highway) 18 / 26 mpg
Power-to-Weight Ratio 12.08 lb per bhp
CHASSIS
Suspension
   front MacPherson struts, lower control arms, coil springs, tube shocks, anti-roll bar
   rear Struts, lower lateral links, trailing, links, toe links, coil springs, tube shocks, anti-roll bar
Steering Power-assisted, rack and pinion, 2.9 turns lock-to-lock
Brakes Four-wheel, vacuum-assisted discs, ABS
   front 12.5 in vented discs
   rear 11.8 in solid discs
Wheels and Tires
   front Cast alloy 17 x 7 in, 205/50ZR
   rear Cast alloy 17 x 8.5 in, 255/40ZR
DRIVETRAIN
Transmission Six speed manual
Layout Mid-engine, rear wheel drive
Gear Ratios
1st 3.82
2nd 2.20
3rd 1.52
4th 1.22
5th 1.02
6th 0.84
Final Drive Ratio 3.44:1
DIMENSIONS
Type Two door, two passenger, sports convertible
Construction Unit steel body and frame
Overall Length 171.0 in
Width 70.1 in
Height 50.8 in
Wheelbase 95.2 in
Weight Distribution (front/rear) 48 % / 52%
Curb Weight 3020 lbs
Fuel Tank Capacity 16.9 gallons
Trunk Capacity 5.2 + 6.0 cubic ft
Headroom (front/rear) 36.5 in / na
Legroom (front/rear) 44.0 in / na
The data was obtained by Road & TrackŪ magazine